Train Guard
When you think of a guard, your first thoughts are probably a person waving a flag and blowing a whistle but it is much more than that! Whilst the drivers are responsible for the engines themselves, the guard is in charge of the entire train as well as those onboard. As a guard, you are responsible for the safety of the train, as well as going through and checking tickets and interacting with passengers during the days running.
Our senior guards Jenny and Mike mentor prospective guards, provide skills training and organise the rota for events.
Jenny lists the following skills and attributes that make a good guard:
When you think of a guard, your first thoughts are probably a person waving a flag and blowing a whistle but it is much more than that! Whilst the drivers are responsible for the engines themselves, the guard is in charge of the entire train as well as those onboard. As a guard, you are responsible for the safety of the train, as well as going through and checking tickets and interacting with passengers during the days running.
Our senior guards Jenny and Mike mentor prospective guards, provide skills training and organise the rota for events.
Jenny lists the following skills and attributes that make a good guard:
- Ability to interface with the public and good communication skills
- Assertiveness - as you are in charge of the train
- NO fear of dogs - we are a dog friendly railway and get many furry visitors
- Awareness of safe lifting and handling - visitors may have reduced mobility or be wheelchair users
- A friendly disposition and smart attire
Train Crew
Probably the first job that comes to mind when picturing a heritage railway is a locomotive driver, and volunteering with SRC can make this a reality! Before you can jump on the footplate there's a lot to learn. When you join the locomotive department you'll be helping with general locomotive maintenance, overhauls and general engine cleaning. Time and again this has been shown to be the best way to learn the workings of an engine. It may seem daunting, but it's an incredibly rewarding experience as all our loco crew will tell you.
We have both industrial diesel and steam locomotives at KSE. There is a training programme for each.
Mike T is the operations manager for the locomotive department and has decades of experience in steam locomotives from restoration to operation including crewing mainline steam trains. He mentors and trains prospective locomotive crews assisted by Mike P who is senior diesel driver and trainer.
Both diesel and steam crews require a period of learning the theory and practical skills for the roles before they can sit the exams required.
The pathway to Diesel Driver requires initial training as a 'Secondman' who assists the driver and learns the skills required to become a driver. You will learn to drive both our diesel mechanical locomotive 'Elizabeth' and diesel hydrallic electric locomotive 'Stanton 50' and have theory and practical exams on both before you become a diesel driver.
The pathway to Steam Driver requires experience in diesel driving first then your learn the theory and practical skills to train as a 'Fireman'. Once you become a 'passed fireman' you can start training to be a steam locomotive driver if you wish.
How an operating day works:
All days require a track inspection and 'Fitness to Run' examinations on the coaches and locomotives these are undertaken by the Responsible Officer, Guard and Locomotive Crews. All operating days require a shunt of rolling stock, making up the train and a brake test (supervised by the guard) and running trains from 10:30 til 4pm. Services run every 30 minutes along our half mile of track. After the last train the rolling stock and locomotives have to shunted and put away and the station shut up.
Diesel operational days as detailed above and we run two diesel locomotives 'Stanton 50' (diesel hydrallic electric) and 'Elizabeth' (diesel mechanical). The usual hours for shift on a diesel day are 8am - 5pm
Steam operational days are a bit more complicated than diesel days as the steam locomotive needs to be prepared the day before operation to 'warm through'.
The day before an event the fireman and driver prepare the locomotive by raising a fire and testing the locomotive and a diesel crew member is required to get the steam locomotive out of the train shed. The usual hours for a shift on pre-steam day events are 8am- 4pm.
It is an early start on the day of an event for steam crews to ensure we are ready to run by 10:30. We usually arrive at 6am and after a fitness to run inspection the diesel locomotive pulls the steam locomotive out to be lit up and prepared to run. We run a steam locomotive on the front of train with 'Elizabeth' our 0-4-0 diesel on the back. Once the steam locomotive is ready and the shunt of rolling stock in completed we are ready to run from 10:30 til 4pm. After the last train the rolling stock will be put away and we have to wait for the steam locomotive to be ready to put into the train shed and the fire to 'die down'. The usual hours for a shift on steam operational days are 6am - 6pm.
Probably the first job that comes to mind when picturing a heritage railway is a locomotive driver, and volunteering with SRC can make this a reality! Before you can jump on the footplate there's a lot to learn. When you join the locomotive department you'll be helping with general locomotive maintenance, overhauls and general engine cleaning. Time and again this has been shown to be the best way to learn the workings of an engine. It may seem daunting, but it's an incredibly rewarding experience as all our loco crew will tell you.
We have both industrial diesel and steam locomotives at KSE. There is a training programme for each.
Mike T is the operations manager for the locomotive department and has decades of experience in steam locomotives from restoration to operation including crewing mainline steam trains. He mentors and trains prospective locomotive crews assisted by Mike P who is senior diesel driver and trainer.
Both diesel and steam crews require a period of learning the theory and practical skills for the roles before they can sit the exams required.
The pathway to Diesel Driver requires initial training as a 'Secondman' who assists the driver and learns the skills required to become a driver. You will learn to drive both our diesel mechanical locomotive 'Elizabeth' and diesel hydrallic electric locomotive 'Stanton 50' and have theory and practical exams on both before you become a diesel driver.
The pathway to Steam Driver requires experience in diesel driving first then your learn the theory and practical skills to train as a 'Fireman'. Once you become a 'passed fireman' you can start training to be a steam locomotive driver if you wish.
How an operating day works:
All days require a track inspection and 'Fitness to Run' examinations on the coaches and locomotives these are undertaken by the Responsible Officer, Guard and Locomotive Crews. All operating days require a shunt of rolling stock, making up the train and a brake test (supervised by the guard) and running trains from 10:30 til 4pm. Services run every 30 minutes along our half mile of track. After the last train the rolling stock and locomotives have to shunted and put away and the station shut up.
Diesel operational days as detailed above and we run two diesel locomotives 'Stanton 50' (diesel hydrallic electric) and 'Elizabeth' (diesel mechanical). The usual hours for shift on a diesel day are 8am - 5pm
Steam operational days are a bit more complicated than diesel days as the steam locomotive needs to be prepared the day before operation to 'warm through'.
The day before an event the fireman and driver prepare the locomotive by raising a fire and testing the locomotive and a diesel crew member is required to get the steam locomotive out of the train shed. The usual hours for a shift on pre-steam day events are 8am- 4pm.
It is an early start on the day of an event for steam crews to ensure we are ready to run by 10:30. We usually arrive at 6am and after a fitness to run inspection the diesel locomotive pulls the steam locomotive out to be lit up and prepared to run. We run a steam locomotive on the front of train with 'Elizabeth' our 0-4-0 diesel on the back. Once the steam locomotive is ready and the shunt of rolling stock in completed we are ready to run from 10:30 til 4pm. After the last train the rolling stock will be put away and we have to wait for the steam locomotive to be ready to put into the train shed and the fire to 'die down'. The usual hours for a shift on steam operational days are 6am - 6pm.
Download a registration form:
|
PDF File:
|
Word Document:
| ||||||||||||
Volunteering Requirements
- To be over 18 years of age and meet medical fitness standards
- Completed registration form
- Compliance with our health and safety requirements listed in the volunteer handbook
- To undergo appropriate training for the role and pass written and practical exams - renewed every two years
- Good communication and team working skills
- Regular volunteering at KSE - to retain skills for the role(s) and maintain locomotives and coaches